Winter large trees entrance wallpaper
Reference: P7835The Winter large trees entrance wallpaper features a stunning design with intricate tree trunks and branches in shades of grey, creating a captivating and timeless look. The non-woven wallpaper is manufactured in matt colours, adding a touch of elegance to any space. The durability of 10-15 years ensures that this wallpaper will stand the test of time, making it a perfect choice for long-term decoration. Applying the wallpaper is easy with the use of glue, a roller, brush, and cutter, allowing for a hassle-free installation process. Additionally, it can be easily cleaned with a damp cloth and neutral soap, maintaining its pristine appearance. With an M2 reaction to fire certification, this wallpaper prioritizes safety without compromising on style. Elevate your decor with the Winter large trees entrance wallpaper and create a welcoming ambiance in any room!
Why this product should be used for decoration
The Winter large trees entrance wallpaper is the perfect choice for adding a touch of natural beauty to your space. The captivating tree design brings the essence of the outdoors inside, creating a serene and inviting atmosphere. The stunning grey tones add a sense of sophistication, making it an ideal option for elevating your decor. Transform your space with the timeless elegance of the Winter large trees entrance wallpaper!
How to apply this product
Applying the Winter large trees entrance wallpaper is a straightforward process that begins with preparing the wall and using the necessary tools. Start by applying glue to the wall or the product, then use a roller to ensure a smooth and even application. A brush can be used to reach corners and edges, while a cutter allows for precise trimming. Follow these simple steps to effortlessly enhance your space with the Winter large trees entrance wallpaper!
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 24 hours to your home address available.