Textured Aqua Surface stone effect wallpaper
Reference: P8976A soft texture reminiscent of a natural stone surface in a calming aqua hue. The design features subtle patterns that create an elegant ambiance, perfect for enhancing various spaces with a sense of tranquility and sophistication.
The Textured Aqua Surface stone effect wallpaper features a stunning design with a textured, teal, aqua pattern that adds a smooth and elegant touch to any space. Its matt colours are manufactured in non-woven wallpaper material, making it durable and easy to clean with a damp cloth and a little neutral soap. With a grammage of 180 grams per square metre, this wallpaper has a longevity of 10-15 years and can be easily removed by wetting the product with a sprayer. It is produced and shipped in rolls 50 centimetres wide and has an M2 reaction to fire certification.
Why this product should be used for decoration
The Textured Aqua Surface stone effect wallpaper is the perfect choice for adding a touch of elegance and sophistication to any room. Its unique design and high-quality material make it an ideal option for creating a stylish and modern atmosphere.
How to apply this product
Applying the Textured Aqua Surface stone effect wallpaper is simple and easy. Using glue on the wall or on the product, and the tools to apply it are a roller, a brush, and a cutter. Follow the easy instructions for a seamless application.
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 24 hours to your home address available.