Light colors 70s' pattern Retro Wallpaper
Reference: P3995Bring Back the 70s with This Retro Wallpaper
Add a touch of vintage charm to any room with this light colors 70s' pattern Retro Wallpaper. Made from high-quality materials, this wallpaper is durable and won't bubble or wrinkle when applied. The beautiful geometric design is assembled in a unique style that will make your walls stand out. Plus, it's not affected by heat, moisture, or extreme weather conditions, so you can be sure it will last for years to come.
Easy to Apply and Remove
Not only is this wallpaper easy to apply, but it's also easy to remove. When you're ready for a change, simply peel it off the wall without leaving any residue behind. And with fast shipping, you can have it in your hands in just a few days.
Order Now
Don't wait to bring a retro touch to your space. Order the Light colors 70s' pattern Retro Wallpaper today and transform any room into a stylish, nostalgic haven.
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 24 hours to your home address available.
the
18/01/2026
at
08:12 h
the
23/10/2025
at
02:22 h
the
13/07/2025
at
02:57 h
the
12/04/2025
at
04:06 h
the
10/01/2025
at
20:00 h