Halloween wall mural haunting graveyard scene
Reference: F10044A dark and eerie graveyard scene unfolds with silhouetted tombstones and rising zombie hands against a full moon backdrop. Bats flutter through the starry night, while twisted branches frame the atmospheric design, creating a chilling ambiance perfect for Halloween festivities.
Transform your space this Halloween with our Halloween wall mural haunting graveyard scene, featuring a spine-chilling design that captures the essence of a haunted cemetery. Picture a dark night illuminated by a full moon, with eerie silhouettes of zombies rising from the graves, surrounded by fluttering bats and ominous zombie hands reaching out. The haunting atmosphere is further enhanced by the enchanting moonlight casting shadows over the spooky graves, making it the perfect decoration for thrill-seekers!
Why this product should be used for decoration
The Halloween wall mural haunting graveyard scene is not just a decoration; it's a statement piece that brings your Halloween festivities to life! Imagine the delight on your guests' faces as they step into a world filled with the thrill of the supernatural. This enchanting mural creates an immersive experience, turning any room into a chilling wonderland that captures the spirit of Halloween. Elevate your decorations and create unforgettable memories!
How to apply this product
Applying the Halloween wall mural haunting graveyard scene is a breeze! Simply use glue on the wall or directly on the product, and with the right tools—a roller, brush, and cutter—you'll have your haunting masterpiece up in no time!
Manufactured in matte colors, this non-woven wallpaper not only looks stunning but is also easy to maintain. A quick wipe with a damp cloth and a bit of neutral soap will keep it looking fresh. With a durability of 10-15 years and an M2 reaction to fire certification, you can trust this mural to last throughout many Halloween seasons. Each roll is 50 centimeters wide, allowing for seamless installation and a captivating visual impact.
Strip width: 50 cm
Thickness / weight: 180 g/m2
Custom-made: select the measurements you want and we will adapt the design
100% customizable product: if you want to modify any element of the design, do not hesitate to contact us
Matte finish (satin): non-glossy finish with bright and elegant colors
Easily washable product: Can be gently cleaned with a damp cloth or a non-abrasive sponge and water
Easy installation (bubble-free): Stick directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
100% recyclable product: made with eco-friendly inks
100% secure payments
Also, it will be wrapped in bubble wrap inside a sturdy cardboard package that protects the product during shipping.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 24 hours to your home address available.