Geometric Light Structure modern wall mural
Reference: F7581A striking geometric composition featuring a repetitive structure defined by linear light elements. The white expanse creates an ethereal atmosphere, emphasizing the modern architectural form. The design invites exploration through its dynamic perspective and spatial luminosity.
The Geometric Light Structure modern wall mural is a stunning blend of minimalist architecture and elegant lines that brings a breath of fresh air to any interior space. Its modern design creates a captivating atmosphere, transforming your walls into a canvas of contemporary artistry.
Why this product should be used for decoration
Embrace the charm of the Geometric Light Structure modern wall mural to elevate your home decor! This mural inspires creativity and sophistication, making it the perfect choice for enhancing living rooms, offices, or any area needing a stylish touch. The unique geometric patterns and soothing colors will captivate your guests and create an inviting ambiance.
How to apply this product
Applying the Geometric Light Structure modern wall mural is a breeze! Use a roller or brush with glue on the wall or the product for a seamless finish. Simply clean the mural with a damp cloth for easy maintenance, ensuring it stays vibrant and stylish for years to come.
Strip width: 50 cm
Thickness / weight: 180 g/m2
Custom-made: select the measurements you want and we will adapt the design
100% customizable product: if you want to modify any element of the design, do not hesitate to contact us
Matte finish (satin): non-glossy finish with bright and elegant colors
Easily washable product: Can be gently cleaned with a damp cloth or a non-abrasive sponge and water
Easy installation (bubble-free): Stick directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
100% recyclable product: made with eco-friendly inks
100% secure payments
Also, it will be wrapped in bubble wrap inside a sturdy cardboard package that protects the product during shipping.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 24 hours to your home address available.