Concrete Cement Wall wall mural
Reference: F6825Concrete Cement Wall wall mural
The Cement Wall wall mural is a perfect addition to your industrial-style home. Its graphic design features concrete blocks with a textured finish, adding a touch of rawness to your space. This non-woven wallpaper is manufactured in matte colors, with a 180-gram per square meter grammage for durability of 10-15 years. It can be applied using glue on the wall or product, with tools including a roller, brush, and cutter. To clean, simply use a damp cloth with a little neutral soap. The wall mural is shipped in rolls 50 centimeters wide and has an M2 reaction to fire certification. Easily removable by wetting the product with a sprayer.
Why This Product Should Be Used for Decoration
Its textured finish and concrete block design will inspire you to create a unique and stylish space that is both edgy and sophisticated. Make a statement by using this wall mural in your living room, bedroom, or any other room where you want to add an industrial vibe.
How to Apply This Product
The Concrete texture Wall mural wallpaper can easily be applied to any wall using glue. Before applying, ensure the wall is clean and dry. Using a roller, brush, and cutter, apply the glue to the back of the wallpaper. Once the glue is applied, gently smooth out the wallpaper onto the wall, being careful to avoid any air bubbles. Continue this process until the entire wall is covered.
Why Buy This Product in Our Online Shop
Our online shop offers high-quality wallpaper products that are perfect for any home decor project. It is manufactured with top-quality materials, ensuring its durability for 10-15 years. We offer easy ordering and fast shipping, so you can start your home decor project right away. With our excellent customer service and satisfaction guarantee, you can trust that you are making the right choice when you choose to buy from us.
Strip width: 50 cm
Thickness / weight: 180 g/m2
Custom-made: select the measurements you want and we will adapt the design
100% customizable product: if you want to modify any element of the design, do not hesitate to contact us
Matte finish (satin): non-glossy finish with bright and elegant colors
Easily washable product: Can be gently cleaned with a damp cloth or a non-abrasive sponge and water
Easy installation (bubble-free): Stick directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
100% recyclable product: made with eco-friendly inks
100% secure payments
Also, it will be wrapped in bubble wrap inside a sturdy cardboard package that protects the product during shipping.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 24 hours to your home address available.